2011
Matice, Christioher J. and Gao, Brian,
"Calculation of Finned Tube Pressure Drop and Heat Transfer Using Fully
Three-Dimensional CFD Methods,"
Proceedings of EPRI Boiler Tube and HRSG Tube Failures and Inspections International Conference,
April 19, 2010, Baltimore, Maryland.
[Abstract]
2010
Scrivner, R., Exley, B., and Alexander, C.,
"Girth Weld Failure in a Large Diameter Gas Transmission Pipeline,"
Proceedings of IPC2010 (Paper No. IPC2010-31525), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Alexander, C., and Worth, F.,
"Development of Industry Standards for Composite Repair Systems,"
Proceedings of IPC2010 (Paper No. IPC2010-31525), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Alexander, C. R.,
"Limit State Design Based on Experimental Methods for High Pressure Subsea Pipeline Design,"
Proceedings of IPC2010 (Paper No. IPC2010-31526), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Kulkarni, S., and Alexander, C.,
"An Operator's Perspective in Evaluating Composite Repairs,"
Proceedings of IPC2010 (Paper No. IPC2010-31595), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Bedoya, J., Alexander, C., and Precht, T.,
"Repair of High Pressure Pipe Fittings Using Composite Materials,"
Proceedings of IPC2010 (Paper No. IPC2010-31537), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Alexander, C., Roberts, D., and Logan, R.,
"Evaluating the Performance of the Zap-Lok Connection System,"
Proceedings of IPC2010 (Paper No. IPC2010-31528), 8th International Pipeline Conference,
September 27 – October 1, 2010, Calgary, Alberta, Canada.
[Abstract]
Alexander, C., and Worth, F.,
"Using Industry Standards for Designing Composite Repair Systems for Corroded Process Piping,"
Proceedings of the ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference (Paper No. PVP2010-25923), July 18-22, 2010, Bellevue, Washington.
[Abstract]
Alexander, C.,
"Developing Stress Intensification Factors for Composite Repair Systems Used to Repair Damaged Pipe,"
Proceedings of the ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference (Paper No. PVP2010-25925), July 18-22, 2010, Bellevue, Washington.
[Abstract]
2009
Alexander, C.R.,
"Limit State Design Based on Experimental Methods for High Pressure Subsea Pipeline Design,"
Paper No. IOPF2009-2002, Proceedings of the ASME International Offshore Pipeline Forum,
October 28-29, 2009, Houston, Texas.
[Abstract]
Alexander, C.R.,
"Evaluating Damaged Subsea Pipelines Using an Engineering-Based Integrity Management Program,"
Paper No. IOPF2009-6002, Proceedings of the ASME International Offshore Pipeline Forum,
October 28-29, 2009, Houston, Texas.
[Abstract]
Alexander, C.R.,
"Recent Advances in the Evaluating Composite Repair Technology Used to Repair Transmission Pipelines,"
Clarion Evaluation and Rehabilitation of Pipelines Conference, Pittsburgh Marriott City Center,
October 21-22, 2009.
[Abstract]
Alexander, C.R.,
"Development of Standards for Composite Repair Systems,"
Article 4 in a 4-part series, Pipeline & Gas Technology Magazine, Hart Energy Publishing, LP,
October 2009 edition.
[Abstract]
Alexander, C.R.,
"Evaluating the Ability of Composite Materials to Restore Mechanical Integrity to Pipelines Having Wrinkle Bends,"
Article 3 in a 4-part series, Pipeline & Gas Technology Magazine, Hart Energy Publishing, LP,
September 2009 edition.
[Abstract]
Alexander, C.R.,
"Repair of Pipelines Having Mechanical Damage and Plain Dents Using Composite Materials,"
Article 2 in a 4-part series, Pipeline & Gas Technology Magazine, Hart Energy Publishing, LP,
August 2009 edition.
[Abstract]
Alexander, C.R.,
"Advances in the Repair of Pipelines Using Composite Materials,"
Article 1 in a 4-part series, Pipeline & Gas Technology Magazine, Hart Energy Publishing, LP, July 2009 edition.
[Abstract]
Alexander, C.R.,
"Evaluating Damage to Onshore and Offshore Pipelines Using Data Acquired Using In-line Inspection Efforts,"
The 21st International Pipeline Pigging & Integrity Management Conference, February 11-12, 2009.
[Abstract]
Ayers, R.R.,
"The 20-Hurricane Test ? New Knowledge On Deepwater Polyester Mooring Integrity,"
Proceedings of the 28th ASME International Conference on Ocean, Offshore and Arctic Engineering, May 31 - June 5, 2009.
[Abstract]
2008
Alexander, C.R.,
"Using Testing Methods to Evaluate Subsea Pipeline Performance and Integrity,"
Paper No. IOPF2008-902, Proceedings of the ASME International Offshore Pipeline Forum, October 29-30, 2008, Houston, Texas.
[Abstract]
Alexander, C.R., Manimala, Y., Stubbs, L., and Spikula, D.,
"Evaluating the Performance of a Pipeline Protection System to Prevent Damage to Subsea Pipelines from Dropped Objects,"
Paper No. IOPF2008-903, Proceedings of the ASME International Offshore Pipeline Forum, October 29-30, 2008, Houston, Texas.
[Abstract]
Alexander, C.R., Blockhus, D.J., and Babin, J.,
"Use of Limit Analysis to Assess High Strain Conditions During Installation of Tees in Deepwater Pipelines,"
Paper No. IOPF2008-911, Proceedings of the ASME International Offshore Pipeline Forum, October 29-30, 2008, Houston, Texas.
[Abstract]
Alexander, C.R.,
"Using Testing Methods to Evaluate Pipeline Mechanical Integrity,"
Proceedings of IPC2008 (Paper No. IPC2008-64038), 7th International Pipeline Conference, September 29-October 3, 2008, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R., and Kulkarni, S.,
"Evaluating the Effects of Wrinkle Bends on Pipeline Integrity,"
Proceedings of IPC2008 (Paper No. IPC2008-64038), 7th International Pipeline Conference, September 29-October 3, 2008, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R.,
"Strain-based Design Methods for Composite Repair Systems,"
Proceedings of IPC2008 (Paper No. IPC2008-64038), 7th International Pipeline Conference, September 29-October 3, 2008, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R.,Bolton, B., Semiga, V., Tiku, S., and Dinovitzer, A.,
"Towards a Validated Pipeline Dent Integrity Assessment Model,"
Proceedings of IPC2008 (Paper No. IPC2008-64492), 7th International Pipeline Conference, September 29-October 3, 2008, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R.,Mekha, B., Hogan, M., Rager, B., and Kumar A.,
"Design, Manufacture, Testing, and Deployment of a Cross Haul Bucket for the Independence Hub,"
Paper No. OMAE2008-57598, The 27th International Conference on Offshore Mechanics and Arctic Engineering, June 15-20, 2008, Estoril, Portugal.
[Abstract]
Alexander, Cercone, L., and Lockwood, J.,
"Development of a Carbon-Fiber Composite Repair System for Offshore Risers,"
Paper No. OMAE2008-57599, The 27th International Conference on Offshore Mechanics and Arctic Engineering, June 15-20, 2008, Estoril, Portugal.
[Abstract]
Alexander, C.R., Raghu, D., Swanson, R.C.,
"Methodology to Establish the Fitness for Continued Service of a Damaged Export Pipeline in 1000m of Water,"
OTC 19653, Presented at the 2008 Offshore Technology Conference, May 8, 2008, Houston, Texas.
[Abstract]
Ayers, R.R., O?Hear, N.,
"Polyester Moorings: Is Insert Recovery and Testing the Best Way To Determine Rope Integrity?,"
OTC 19198, Presented at the 2008 Offshore Technology Conference, May 7, 2008, Houston, Texas.
[Abstract]
Ayers, R.R., Hoysan, S., Gage, E., Rebello, A., Stark, M.,
"DW RUPE: A New Deepwater Pipeline Repair Capability for the Gulf of Mexico and Other Deepwater Regions,"
OTC 19207, Presented at the 2008 Offshore Technology Conference, May 8, 2008, Houston, Texas.
[Abstract]
Boubenider, R., Alptunaer K., Fourchy, P.J., De Wilde J.,
"Effectiveness of Polyethylene Helical Strakes in Suppressing VIV Responses After Sustaining High Roller-Load Damage During S-Lay Installation,"
OTC 19289, Presented at the 2008 Offshore Technology Conference, May 8, 2008, Houston, Texas.
[Abstract]
Cordes, R., San Pedro, R.I.,
"Fracture Mechanics-Based Fatigue Predictions for HP/HT Equipment,"
OTC 19502, Presented at the 2008 Offshore Technology Conference, May 5, 2008, Houston, Texas.
[Abstract]
Power, T.L., Garrett, D.L., Maniar, D.R., Phifer, E.H., Vogiatzis, J.P.,
"Spectral and Cycle-Counting Fatigue Damage Estimation Methods for Steel Catenary Risers,"
OTC 19454, Presented at the 2008 Offshore Technology Conference, May 5, 2008, Houston, Texas.
[Abstract]
Scrivner, R., and Alexander, C.,
"Elements of an Engineering-Based Integrity Management Program,"
Proceedings of IPC2008 (Paper No. IPC2008-64038), 7th International Pipeline Conference, September 29-October 3, 2008, Calgary, Alberta, Canada.
[Abstract]
2007
Alexander, C.R., and Frey J.W.,
"Use of Analytical and Experimental Monitoring Techniques in Assessing the Performance of a Cold Reheat Steam Line,"
Paper No. PVP2007-26079, Proceedings of the ASME PVP 2007/CREEP 8 Conference, July 22 - 26, 2007, San Antonio, Texas.
[Abstract]
Alexander, C.R., Armer, W., and Harbert S.J.,
"Evaluation of the Elliptical Flange Configurations for 24-inch and 30-inch Heater/Cooler Units,"
Paper No. PVP2007-26080, Proceedings of the ASME PVP 2007/CREEP 8 Conference, July 22 - 26, 2007, San Antonio, Texas.
[Abstract]
Alexander, C.R.
"Assessing the Effects of Impact Forces on Subsea Flowlines and Pipelines,"
Paper No. OMAE2007-29450, 26th International Conference on Offshore Mechanics and Arctic Engineering, June 10-15, 2007, San Diego, California.
[Abstract]
Alexander, C.R.
"Methodology for Assessing the Effects of Plain Dents, Wrinkle Bends, and Mechanical Damage on Pipeline Integrity,"
Paper No. 07139, NACE International 2007 Corrosion Conference & Exposition, March 11-15, 2007, Nashville, Tennessee.
[Abstract]
Alexander, C.R.
"Guidelines for Repairing Damaged Pipelines Using Composite Materials,"
Paper No. 07144, NACE International 2007 Corrosion Conference & Exposition, March 11-15, 2007, Nashville, Tennessee.
[Abstract]
Alexander, C.R.
"Assessing the Effects of Corrosion on the Mechanical Integrity of a Pipeline Suspension Bridge,"
Paper No. 07148, NACE International 2007 Corrosion Conference & Exposition, March 11-15, 2007, Nashville, Tennessee.
[Abstract]
Knochenmuss, Dale
"Advancements in Design and Testing of Shrink-Wrapped Tray-Based Secondary Packaging,"
International Safe Transit Association (ISTA) International Forum on Transport Packaging, Dimension.07, March 27-30, 2007, Orlando, Florida.
[Abstract]
Malloy K.P.,
"Managed Pressure Drilling – What Is It Anyway?,"
World Oil Magazine, Vol. 228, No. 3, March 2007, pages 27 - 34.
[Abstract]
Malloy K.P. and Roes V.C.
"Improved Reliability of Drilling Operations Using Managed Pressure Drilling Technology: A Case Study in a Brown Field Environment,"
(OTC Paper No. 18461), Presented at the 2007 Offshore Technology Conference, April/May 2007, Houston, Texas.
[Abstract]
Malloy K.P., Medley G.H., and Stone C.R.
"Taking Another Look at the Risk Profile for Air Drilling in the Presence of Hydrocarbons,"
Drilling Contractor Magazine, March, 2007.
[Abstract]
Malloy K.P., Medley G.H., and Stone C.R.
"Air Drilling in the Presence of Hydrocarbons: A Time for Pause,"
(IADC/SPE 108357), IADC/SPE Managed Pressure Drilling and Underbalanced Operations Conference, Galveston, Texas, March 2007.
[Abstract]
2006
Alexander, C.R., and Alexander, L.
"Assessing the Effects of External Damage on Subsea Pipelines,"
Paper No. IOPF2006-014, Proceedings of the ASME International Offshore Pipeline Forum, October 24-25, 2006, Houston, Texas.
[Abstract]
Alexander, C.R., and Francini, B.
"State Of The Art Assessment Of Composite Systems Used To Repair Transmission Pipelines,"
Proceedings of IPC2006 (Paper No. IPC2006-10484), 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R., and Scrivner, R.
"Analysis of Girth Welds in Pipelines Subjected to Lifting Loads,"
Proceedings of IPC2006 (Paper No. IPC2006-10480), 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R., and Wilson, T.
"Reinforcing Field Fabricated Branch Connections Using Composite Materials,"
Proceedings of IPC2006 (Paper No. IPC2006-10483), 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada.
[Abstract]
Alexander, C.R.
"Use of Limit Analysis Methods to Assess the Structural Capacity of Subsea Systems and Components,"
(Paper No. IOPF2006-010), Proceedings of the ASME International Offshore Pipeline Forum, October 24-25, 2006, Houston, Texas.
[Abstract]
Ayers R.R., Ward, E.G., Banfield S.J., O?Hear N., Smith C.E., and Laurendine T.
"The Residual Strength of Damaged Polyester Rope,"
OTC Paper No. 18150, Offshore Technology Conference, May 1-4, 2006, Houston, Texas.
[Abstract]
Bedoya, J., Meyer, C. A., Timmins, L. H., Moreno, M. R., and Moore, J. E., Jr.
"Effects of Stent Design Parameters on Normal Artery Wall Mechanics,"
ASME J. Biomech. Eng., 128, pp. 757 ? 765.
[Abstract]
Fox, A., Buitrago, J., and Doynov, K.
"Effect of Reeling on Welded Umbilical Tubing Fatigue,"
(Paper No. OMAE 2006-92579), 25th International Conference on Offshore Mechanics & Arctic Engineering Conference, June, 2006, Hamburg, Germany.
[Abstract]
Garrett, D.L., Perego, R.N, and Li, G.
"Extreme Response Analyses of Marlin TLP Tendon Tension during Hurricane Ivan,"
(ISBN 1-880653-66-44), Presented at the 2006 International Offshore and Polar Engineering Conference, May 28 - June 2, 2006, San Francisco, CA.
[Abstract]
Ge, L., Bourne, G.R., Kim, N.H., and Sawyer, W.G.
"Material Property Identification and Sensitivity Analysis Using Indentation and FEM,"
Proceedings of IDETC/CIE 2006 (Paper No. DETC2006-99329), ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 10-13, 2006, Philadelphia, Pennsylvania.
[Abstract]
Kim, N.H., and Ge, L.
"Modeling of Electrodynamic Suspension Systems,"
ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 10-13, 2006, Philadelphia, Pennsylvania.
[Abstract]
Hill, T. Zhang, Y., and Kolanski, T.
"The Future for Flexible Pipe Riser Technology in Deepwater: Case Study,"
(OTC Paper No. 17768), Presented at the 2006 Offshore Technology Conference, May 1 - 4, 2006, Houston, Texas.
[Abstract]
Malloy, K.P.
“Comparative Risk Using Managed Pressure Drilling (MPD) Techniques,”
Drilling Contractor Magazine, Mar/Apr, 2006.
[Abstract]
Pordal, H. S., Matice, C.J.
"Multi-tiered Simulation Method for Evaluation, Design and Scale-up of Processes and Process Equipment in the Pharmaceutical Industry,"
Paper Presented to the International Society of Pharmaceutical Engineers, Great Lakes Chapter, vol 12, No. 2, Fall, 2006.
[Abstract]
2005
Alexander, C.R., and Boswell, R.
"Techniques for Modeling Thermal and Mechanical Stresses Generated in Catalytic Cracker and Coke Drum Hot Boxes,"
2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado.
[Abstract]
Alexander, C.R., and Pordal, H.
"Modeling Leakage in a Fuel Transfer Pipeline Using Computational Fluid Dynamics Techniques,"
2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado.
[Abstract]
Allevato, C., Farraro, T.
"Assessing the Quality of Automated and Manual Coke Drum Welds from American and Japanese Coke Drum Manufacturers using Acoustic Emission Monitoring During Code Required Hydrotest"
[Abstract]
Allevato, C.
"Assessing the Structural Integrity of High Temperature Reformer and Hydroprocessing Units by Means of Acoustic Emission Cooldown Monitoring,"
National Pressure Equipment Conference, Alberta, Canada.
[Abstract]
Beall, S., McMillan, C., and Rein?s, L.
"Thermal Management of Closed Volume Spaces in Subsea Production Equipment,"
(SPE Paper No. 97596), Presented at the 2005 SPE Hydrocarbon Economics and Evaluation Symposium, April 3-5, 2005, Dallas, Texas.
[Abstract]
Bedoya, J., Meyer, C. A., Moreno, M. R., and Moore, J. E., Jr.,
"Stress Quantification In Stented Hyperelastic Artery Models: Tools For Improving Stent Design And Reducing Restenosis,"
2005 ASME Summer Bioengineering Conference, Vail, Colorado.
[Abstract]
Bhalla, K., and Cao, Y.
"Watch Circle Assessment of Drilling Risers during a Drift-Off and Drive-Off Event of a Dynamically Positioned Vessel,"
2005 MTS Dynamic Positioning Conference, September 27?28, 2005, Houston, Texas.
[Abstract]
Biel, R., and Alexander, C.R.
"Application of Limit Load Analyses to Assess the Structural Integrity of Pressure Vessels,"
2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado.
[Abstract]
Brownlee, J.K., Flesner, K.O., Riggs, K.R., and Miglin, B.P.
"Selection and Qualification of Materials for HPHT Wells,"
(SPE Paper No. 97590), Presented at the SPE High Pressure-High Temperature Sour Well Design Applied Technology Workshop, May 17 - 19, 2005, The Woodlands, Texas.
[Abstract]
Chappell, J.F., Perego, R.N, Li, G., Beynet, P.A., Garrett, D.L., and Gordon, R.B.
"The Marlin TLP: Measured and Predicted Responses during Hurricane Ivan,"
(OTC Paper No. 17335), Presented at the 2005 Offshore Technology Conference, May 2-5, 2005, Houston, Texas.
[Abstract]
Garrett, D.L.
"Coupled Analysis of Floating Production Systems,"
Ocean Engineering - An International Jouranl of Research and Development, Elsevier Journals, Vol 32, pages 802 - 816.
[Abstract]
DeHoff, S.
"Innovation and Cost Trends in Private Label Rigid Plastic Packaging,"
A Stress Engineering Services, Inc. White Paper.
[Abstract]
DeHoff, S.
"The Big Squeeze – How Opposing Energy and Labor Trends may Alter Plastics,"
A Stress Engineering Services, Inc. White Paper.
[Abstract]
Hoysan, S.F., and Johnson, P.O.
"Impact of CVD Film Deposition on Pitch Change,"
2005 Society for Information Display International Symposium, May 22-27, 2005, Boston, Massachusetts.
[Abstract]
Hoysan, S.F., and Kuroki, H.
"Effects on Seal Material Resulting from a Pre-Assembly Temperature Difference Between the TFT and CF Substrate,"
2005 Society for Information Display International Symposium, May 22-27, 2005, Boston, Massachusetts.
[Abstract]
Malloy, K.P., and Hall, R.W.
"Contact Pressure Threshold: An Important New Aspect of Casing Wear,"
(Paper No. SPE 94300), SPE Production and Operations Symposium, Oklahoma City, OK, April 2005.
[Abstract]
Maniar, D., Gonzalo V?squez, L.F., and Tassoulas, J.L.
"Suction Caissons: Finite Element Modeling,"
5th GRACM International Congress on Computational Mechanics, June 29?July 1, 2005, Limassol, Cyprus.
[Abstract]
Haridas, B., and Pordal, H. S.
"Multi-tiered Hemodynamics Tool for Design Synthesis of Minimally Invasive EndoCardioPulmonary Bypass Systems,"
Paper Presented at the Design of Medical Devices Conference, April 13 - 15, 2005, Minneapolis, MN.
[Abstract]
Young, K. Alexander, C., Biel, R., and Shanks, E.
"Updated Design Methods for HPHT Equipment,"
(SPE Paper No. 97595), Presented at the 2005 SPE Applied technology Workshop on High Pressure/High Temperature Sour Well Design, May 17 - 19, 2005, Houston, Texas.
[Abstract]
2004
Alexander, C.R., and Biel, R.C.
"Certification Program for Assessing the Mechanical Integrity of Pressure Vessel Systems,"
2004 ASME Pressure Vessel and Piping Conference, San Diego, California.
[Abstract]
Alexander, C.R., Runte, D., and Long, R.J.
"Assessing the Effects of Vibratory Loads on Pipelines Using Analysis and Monitoring Techniques,"
2004 ASME Pressure Vessel and Piping Conference, San Diego, California.
[Abstract]
Brownlee, K., Speed, C., and Whitehead, R.
"Decision Making in Coating Selection for Marine/Offshore Environments,"
Coatings for Corrosion Protection: Offshore Oil & Gas Operation Facilities, Marine Pipeline & Ship Structures, April 14-16, 2004, Biloxi, Mississippi.
[Abstract]
Gordon, R.B.
"Developments in Deepwater Moorings,"
3rd Annual IBC Floating Production Systems USA Conference, June 28 - 30, 2004, Houston, TX.
[Abstract]
2003
Bhalla, K., and Zener, G.
"Safe & Economic Selection of Casing & Wellhead Equipment for Deepwater, Dynamically Positioned Operations,"
15th Annual Deep Offshore Technology International Conference, November 19-21, 2003, Marseille, France.
[Abstract]
Garrett, D.L., Chappell, J.F., Perego, Gordon, R.B., and Cao, Y.
"Integrated Design of Risers and Moorings,"
Presented at the 2003 International Symposium - Deepwater Mooring Systems: Concepts, Design, Analysis & Materials, October 2 - 3, 2003, Houston, Texas.
[Abstract]
Miller, J.E. and Stidston, E.
"Improvements to Ultra-Deepwater Controls Reliability through State-of-the-Art Analytical Techniques,"
(OTC Paper No. 15232), Presented at the 2003 Offshore Technology Conference, May 5-8, 2003, Houston, Texas.
[Abstract]
Pordal, H. S., Matice, C.J.
"Multi-tiered Solution Technique for Design, Analysis and Scale-up of Mixing Processes,"
Chemical Processing Magazine, February, 2003.
[Abstract]
2002 - 2000
Pordal, H. S., Matice, C.J., and Fry, T.J.
"The Role of Computational Fluid Dynamics in the Pharmaceutical Industry,"
Pharmaceutical Technology North America Magazine, February, 2002.
[Abstract]
Pordal, H. S., Matice, C.J., and Fry, T.J.
"Using CFD Models To Simulate Multiphase Flows,"
Spotlight: Software, Chemical Processing Magazine, November, 2001.
[Abstract]
Allevato, C.
"Evaluating the Structural and Mechanical Integrity of Pressure Vessels and Components,"
ASME ETCE/OMAE 2000 Joint Conference, February 14?17, 2000, New Orleans, Louisiana.
[Abstract]
|
