an employee-owned company

Technical Publications

Improvements to Ultra‐deepwater Controls Reliability through State‐of‐the‐Art Analytical Techniques
Miller, J.E., Stidston, E.
OTC-15232-MS, Offshore Technology Conference, May 5-8, 2003, Houston, Texas. Go To Paper
Design of a Riser Recoil Control System and Validation Through Full-Scale Testing
Stahl, M.J., Hock, C.J.
SPE-62959-MS, Proceedings of the SPE Annual Technical Conference and Exhibition, Dallas, TX, October 1-4, 2000 Go To Paper
Development and Validation of a Modeling Technique for the Accurate Prediction of Heat-Up Times
San Pedro, R.I., Du, X., Wallis, R. A.
18th Heat Treating Society Conference, Rosemont, IL, October, 1998. Go To Paper
A Reliability Approach to the Design of OCTG Tubulars Against Collapse
Ju, G.T., Power, T.L., Tallin, A.G.
Paper No. SPE-48332-MS, Proceedings of SPE Applied Technology Workshop on Risk Based Design of Well Casing and Tubing, The Woodlands, Texas, May 7-8, 1998 Go To Paper
Circumferential Stiffeners As Buckle Arrestors In Long Panels
Power, T.L., Kyriakides, S.
Vol. 33, Is. 13, Pg. 1837–1851, Proceedings of International Journal of Solids and Structures, Austin, Texas, May 1996 Go To Paper
Riser Collapse Pressures Resulting from Release of Deepwater Mud Columns
Miller, J.E., Stahl, M.J., Matice, C.J.
Paper No. OTC-8853-MS, Offshore Technology Conference, May 4-7, 1998, Houston, Texas. Go To Paper
Four Years’ Experience Using an Inconel Probe to Test the Cooling Characteristics of Production Quench Oil
San Pedro, R.I., Owens, S., Wallis, R. A.
17th Heat Treating Society Conference, Indianapolis, IN, September, 1997. Go To Paper
Localization and Propagation of Instabilities in Long Shallow Panels Under External Pressure
Power, T.L., Kyriakides, S.
Vol. 61, Is. 4, Proceedings of ASME Journal of Applied Mechanics, Austin, Texas, December 1, 1994 Go To Paper
Analysis and Design of Anti-Recoil System for Emergency Disconnect of a Deepwater Riser: Case Study
Young, R.D., Miller, J.E., Hock, C.J., Karlsen, G.
OTC-6865-MS, Offshore Technology Conference, May 4-7, 1992, Houston, Texas, USA. Go To Paper
Development of a Mud-Motor-Powered Coring Tool
Miller, J.E., Huey, D.P.
OTC-6865-MS, Offshore Technology Conference, May 4-7, 1992, Houston, Texas, USA. Go To Paper