Developments in High Temperature Assessment

ABSTRACT:

Two new assessment methods are suggested for high temperature components. First, in addition to creep damage, the calculation of the rupture failure probability rate provides information on the changes in risk over time. This is particularly helpful for aging components when the minimum properties creep damage calculation may have predicted cracking which has not occurred, sometimes significantly earlier. Second, the increasing importance of cyclic loading requires an effective analysis technique. A simplified shakedown analysis method is described which is significantly easier to perform than detailed cyclic creep analysis. It provides conservative results and allows the likely thermal-mechanical causes of reduced creep and fatigue life due to cycling to be identified. It also assists the performing of the full and detailed cyclic creep analyses.

 

Carter, Peter, “Developments in High Temperature Assessment” Proceedings of EPRI International Conference: Advances in Condition And remaining Life Assessment for Fossil Power Plants, October 17 – 19, 2012, Hilton Head, SC.

Close

Contact Us

If you would like more information on Stress Engineering Services, please call us at 281.955.2900, or complete the following form and one of our representatives contact you shortly. For a complete listing of contact information, visit our Locations page.